I. Oberer Arm｜II. Unterer Arm｜III. Montagebasis

IV. Display-Halterung｜V. C-Klemme

A. 5 mm Inbusschlüssel｜B. Schraube für Klemme x 1 (M8 x 90)｜C. Schraube für Durchführung x 1 (M8 x 130)

D. Gelenkscheibe x 2｜E. Scharniergelenk｜F. 3 mm Inbusschlüssel

G. Gelenkschraube (M5 x 30)｜H. Schraube x 4 (M4 x 12)｜I. Unterlegscheibe x 4 (D5)

J. Ersatzteile

Illustration of package contents
Illustration of package contents

Note

Die hier gezeigten Abbildungen können von den tatsächlichen Produktinhalten und der gelieferten Ware in Deiner Region abweichen.

Produktübersicht

Product overview
Product overview
Inhalt
1. Montageoptionen
2-A. Montage der Basis – Klemme
2-B. Montage der Basis – Durchführung
3. Unteren Arm anbringen
4. Display-Halterung und oberen Arm anbringen
5. Monitor anbringen
6. Spannung einstellen
7. Kabelmanagement (optional)
1. Montageoptionen
2-A. Montage der Basis – Klemme
2-B. Montage der Basis – Durchführung
3. Unteren Arm anbringen
4. Display-Halterung und oberen Arm anbringen
5. Monitor anbringen
6. Spannung einstellen
7. Kabelmanagement (optional)

1. Montageoptionen

A. Klemme

Clamp mounting environment.
Clamp mounting environment.

B. Durchführung

Grommet mounting environment.
Grommet mounting environment.

2-A. Montage der Basis – Klemme

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

Ziehen Sie die Schraube zunächst nur halb fest.

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

Achten Sie darauf, die Teile sicher zu halten, damit sie nicht herunterfallen.

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

Schraube festziehen.

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. Montage der Basis – Durchführung

Die Aussparungen müssen genau übereinstimmen.

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. Unteren Arm anbringen

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

Ziehen Sie die Schraube nicht zu fest an.

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. Display-Halterung und oberen Arm anbringen

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

Schraube festziehen.

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

Die Aussparungen müssen genau übereinstimmen.

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

Ziehen Sie die Schraube nicht zu fest an.

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. Monitor anbringen

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

Fixieren Sie die Schrauben und Unterlegscheiben mit einem Kreuzschlitzschraubenzieher (nicht im Lieferumfang enthalten).

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. Spannung einstellen

Versuche den Monitor zu heben, zu senken oder zu neigen. Bleibt er nicht auf der gewünschten Position, passe die Spannung wie abgebildet an.

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. Kabelmanagement (optional)

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.