I. Horní rameno｜II. Dolní rameno｜III. Základna držáku

IV. Držák na Displej｜V. C-svorka

A. Imbusový klíč 5 mm｜B. Šroub ke svorce x 1 (M8 x 90)｜C. Šroub pro průchodku x 1 (M8 x 130)

D. Podložka pantu x 2｜E. Kloub pantu｜F. Imbusový klíč 3 mm

G. Šroub kloubu (M5 x 30)｜H. Šroub x 4 (M4 x 12)｜I. Podložka x 4 (D5)

J. Náhradní díly

Illustration of package contents
Illustration of package contents

Note

Obrázky zde uvedené se mohou lišit od skutečného obsahu a produktu dodaného pro váš region.

Přehled produktu

Product overview
Product overview
Content
1. Možnosti uchycení
2-A. Instalace základny držáku – svorka
2-B. Instalace základny držáku – průchodka
3. Instalace dolního ramene
4. Instalace držáku na Displej a horního ramene
5. Instalace monitoru
6. Nastavení napnutí
7. Uspořádání kabelů (volitelné)
1. Možnosti uchycení
2-A. Instalace základny držáku – svorka
2-B. Instalace základny držáku – průchodka
3. Instalace dolního ramene
4. Instalace držáku na Displej a horního ramene
5. Instalace monitoru
6. Nastavení napnutí
7. Uspořádání kabelů (volitelné)

1. Možnosti uchycení

A. Svorka

Clamp mounting environment.
Clamp mounting environment.

B. Průchodka

Grommet mounting environment.
Grommet mounting environment.

2-A. Instalace základny držáku – svorka

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

Přitáhněte šroub jen do poloviny.

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

Držte díly opatrně, aby nespadly.

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

Utáhněte šroub.

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. Instalace základny držáku – průchodka

Dbejte na správné zarovnání otvorů.

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. Instalace dolního ramene

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

Šroub neutahujte nadměrně.

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. Instalace držáku na Displej a horního ramene

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

Utáhněte šroub.

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

Dbejte na správné zarovnání otvorů.

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

Šroub neutahujte nadměrně.

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. Instalace monitoru

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

Přišroubujte šrouby a podložky křížovým šroubovákem (není součástí balení).

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. Nastavení napnutí

Zkuste monitor zvednout, snížit nebo naklonit. Pokud nezůstane v požadované výšce/úhlu, upravte napnutí, jak je znázorněno.

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. Uspořádání kabelů (volitelné)

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.