A. LCD monitorius|B. Monitoriaus stovas|C. Monitoriaus pagrindas

D. Naudotojo dokumentacija|E. Maitinimo laidas

F. USB-C™ laidas|G. HDMI kabelis G3|H. USB-B laidas

Illustration of package contents
Illustration of package contents

Note

Čia pateiktos nuotraukos gali skirtis nuo tikrojo turinio ir produkto, kuris tiekiamas jūsų regione.

Content
Pradinis nustatymas
Programavimo serija
Kampo reguliavimas
Display Pilot 2 diegimas
Kelių monitorių jungimas (daisy chaining)
Valdykite kelis įvestis su viena klaviatūra ir pele (KVM jungiklis)
Pradinis nustatymas
Programavimo serija
Kampo reguliavimas
Display Pilot 2 diegimas
Kelių monitorių jungimas (daisy chaining)
Valdykite kelis įvestis su viena klaviatūra ir pele (KVM jungiklis)

Pradinis nustatymas

1.

Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.
Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.

2.

Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.
Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.

3.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

4.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect the PC video cable.
Connect the PC video cable.

6.

Connect the power.
Connect the power.

7.

Remove the protective film.
Remove the protective film.

8.

Turn-on the power.
Turn-on the power.

Programavimo serija

Pažangus programavimo produktyvumas

Funkcijų juosta: A. Maitinimo mygtukas|B. 5 krypčių valdiklis|C. Funkcijų mygtukas

MoonHalo: naudokite 5 krypčių valdiklį, kad įeitumėte į MoonHalo greitą meniu

Promanning Series Monitor Features: Function Bar and MoonHalo
Promanning Series Monitor Features: Function Bar and MoonHalo

Kampo reguliavimas

Adjust the viewing angle.
Adjust the viewing angle.

Display Pilot 2 diegimas

Efektyviai valdykite savo ekrano nustatymus. (Atsisiųsti į kompiuterį)

Display Pilot 2 software features
Display Pilot 2 software features

Kelių monitorių jungimas (daisy chaining)

Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.
Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.

Valdykite kelis įvestis su viena klaviatūra ir pele (KVM jungiklis)

Jungtys

Connect the control devices and other USB peripherals to the USB ports on the monitor.
Connect the control devices and other USB peripherals to the USB ports on the monitor.

Connect at least two video sources to the monitor.
Connect at least two video sources to the monitor.

Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.
Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.