I. Braț superior｜II. Braț inferior｜III. Bază de prindere

IV. Suport Afişaj｜V. Clește C

A. Cheie imbus 5 mm｜B. Șurub pentru clemă x 1 (M8 x 90)｜C. Șurub pentru grommet x 1 (M8 x 130)

D. Șaibă balama x 2｜E. Articulație balama｜F. Cheie imbus 3 mm

G. Șurub balama (M5 x 30)｜H. Șurub x 4 (M4 x 12)｜I. Șaibă x 4 (D5)

J. Piese de rezervă

Illustration of package contents
Illustration of package contents

Note

Imaginile prezentate aici pot diferi de conținutul real și de produsul livrat în regiunea ta.

Prezentare generală a produsului

Product overview
Product overview
Content
1. Opțiuni de montare
2-A. Instalarea bazei - Clește
2-B. Instalarea bazei - Grommet
3. Instalarea brațului inferior
4. Instalarea suportului de afișaj și a brațului superior
5. Instalarea unui monitor
6. Reglarea tensiunii
7. Organizarea cablurilor (opțional)
1. Opțiuni de montare
2-A. Instalarea bazei - Clește
2-B. Instalarea bazei - Grommet
3. Instalarea brațului inferior
4. Instalarea suportului de afișaj și a brațului superior
5. Instalarea unui monitor
6. Reglarea tensiunii
7. Organizarea cablurilor (opțional)

1. Opțiuni de montare

A. Clește

Clamp mounting environment.
Clamp mounting environment.

B. Grommet

Grommet mounting environment.
Grommet mounting environment.

2-A. Instalarea bazei - Clește

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

Strânge șurubul doar pe jumătate.

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

Ține piesele cu grijă ca să nu cadă.

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

Strânge șurubul.

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. Instalarea bazei - Grommet

Potrivește perfect găurile.

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. Instalarea brațului inferior

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

Nu strânge prea tare șurubul.

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. Instalarea suportului de afișaj și a brațului superior

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

Strânge șurubul.

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

Potrivește perfect găurile.

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

Nu strânge prea tare șurubul.

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. Instalarea unui monitor

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

Fixează șuruburile și șaibele cu o șurubelniță cruciformă (nu este inclusă în pachet).

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. Reglarea tensiunii

Încearcă să ridici, să cobori sau să înclini monitorul. Dacă acesta nu rămâne la înălțimea/ânghiul dorit, ajustează-l conform instrucțiunilor.

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. Organizarea cablurilor (opțional)

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.