I. Övre arm｜II. Nedre arm｜III. Fästbas

IV. Skärmfäste｜V. C-klämma

A. 5 mm insexnyckel｜B. Skruv till klämma x 1 (M8 x 90)｜C. Skruv till genomföring x 1 (M8 x 130)

D. Bricka till gångjärn x 2｜E. Gångjärns-fog｜F. 3 mm insexnyckel

G. Gångjärnsskruv (M5 x 30)｜H. Skruv x 4 (M4 x 12)｜I. Bricka x 4 (D5)

J. Reservdelar

Illustration of package contents
Illustration of package contents

Observera

Bilderna som visas här kan skilja sig från verkligt innehåll och produkt beroende på region.

Produktöversikt

Product overview
Product overview
Content
1. Monteringsalternativ
2-A. Installera monteringsbas - Klämma
2-B. Installera monteringsbas - Genomföring
3. Montera nedre armen
4. Montera skärmfäste och övre arm
5. Montera en Skärm
6. Justering av spänning
7. Kabelhantering (valfritt)
1. Monteringsalternativ
2-A. Installera monteringsbas - Klämma
2-B. Installera monteringsbas - Genomföring
3. Montera nedre armen
4. Montera skärmfäste och övre arm
5. Montera en Skärm
6. Justering av spänning
7. Kabelhantering (valfritt)

1. Monteringsalternativ

A. Klämma

Clamp mounting environment.
Clamp mounting environment.

B. Genomföring

Grommet mounting environment.
Grommet mounting environment.

2-A. Installera monteringsbas - Klämma

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

Dra åt skruven till hälften.

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

Håll delarna försiktigt och se till att de inte ramlar.

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

Dra åt skruven.

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. Installera monteringsbas - Genomföring

Justera så att hålen passar ordentligt.

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. Montera nedre armen

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

Dra inte åt skruven för hårt.

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. Montera skärmfäste och övre arm

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

Dra åt skruven.

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

Justera så att hålen passar ordentligt.

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

Dra inte åt skruven för hårt.

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. Montera en Skärm

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

Sätt fast skruvar och brickor med en stjärnskruvmejsel (ingår ej i förpackningen).

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. Justering av spänning

Försök att lyfta, sänka eller luta Skärmen. Om den inte stannar på den höjd eller vinkel du valt, justera enligt illustrationen.

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. Kabelhantering (valfritt)

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.