A. LCD-skärm｜B. Skärmstativ｜C. Skärmbas

D. Användardokument｜E. Nätkabel

F. USB-C™-kabel｜G. HDMI-kabel G3｜H. USB-B-kabel

Illustration of package contents
Illustration of package contents

Observera

Bilderna som visas här kan skilja sig från det faktiska innehållet och produkten som levereras i din region.

Content
Installation
Programmeringsserien
Vinkeljustering
Installera Display Pilot 2
Ansluta flera skärmar (daisy chaining)
Arbeta med flera ingångar med ett tangentbord och en mus (KVM Växla)
Installation
Programmeringsserien
Vinkeljustering
Installera Display Pilot 2
Ansluta flera skärmar (daisy chaining)
Arbeta med flera ingångar med ett tangentbord och en mus (KVM Växla)

Installation

1.

Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.
Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.

2.

Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.
Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.

3.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

4.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect the PC video cable.
Connect the PC video cable.

6.

Connect the power.
Connect the power.

7.

Remove the protective film.
Remove the protective film.

8.

Turn-on the power.
Turn-on the power.

Programmeringsserien

Maximal produktivitet för programmering

Funktionsfält: A. Strömknapp｜B. 5-vägs styrspak｜C. Funktionsknapp

MoonHalo: använd 5-vägs styrspaken för att komma åt Snabbmenyn för MoonHalo

Promanning Series Monitor Features: Function Bar and MoonHalo
Promanning Series Monitor Features: Function Bar and MoonHalo

Vinkeljustering

Adjust the viewing angle.
Adjust the viewing angle.

Installera Display Pilot 2

Hantera dina skärminställningar smidigt. (Ladda ner till PC)

Display Pilot 2 software features
Display Pilot 2 software features

Ansluta flera skärmar (daisy chaining)

Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.
Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.

Arbeta med flera ingångar med ett tangentbord och en mus (KVM Växla)

Anslutningar

Connect the control devices and other USB peripherals to the USB ports on the monitor.
Connect the control devices and other USB peripherals to the USB ports on the monitor.

Connect at least two video sources to the monitor.
Connect at least two video sources to the monitor.

Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.
Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.