Proiettore da gaming per console a tiro corto 4K HDR 4LED | X500i

Yes, definitely!

X500i is our top choices for console gamers looking to fully immerse in open world games. Our X500i is specially designed for gamers to see true to life authentic landscapes in 4K resolution as well as hear the distinct actions from all around with virtual surround sound. Aiming to provide the most realistic in-game experience,  X500i expands and blends the boundaries of your games with play settings such as your living room or bedroom.

Yes. You can connect X500i to Switch, PS5, PS4 and Xbox using an HDMI cable.

The current firmware version only supports 3D Frame Sequential (PC) and Frame Packing (Blu-ray), the side by side 3D and Top & Bottom 3D are not supported yet. 

Please notice that the new firmware which supports streaming 3D formats will be released later. If you have any questions please contact with BenQ service center.

Auto Color Calibration can be supported when you switch to any of the following picture modes: Living Room / Game (FPS, RPG, SPG)  / Sports / Cinema / DCI-P3 / (3D) / (HDR10) / (HDR Game) / (HLG) / User.

You can select a preferred mode among FPS, RPG, SPG.

• FPS (First-Person Shooting): Enhances detail viewing experience by revealing all the enemies hidden in dark shadows, and provides surrounding sound to hear the distant footsteps and gunshot and recognize from which direction they're attacking from.

• RPG (Role-Playing): Provides life-like CinematicColor and deep and powerful cinema sound as if your're in a film-like and role-playing game world.

• SPG (Sports): Provides true colors and live vocal sound to fully enjoy a live broadcast sports game.

The input lag is 4.2ms@240Hz (1080p), 8.3ms@120Hz (1080p), and 16.67ms@60Hz (4K)

Since image processing is required for the keystone function, input lag will be slightly longer* but not affecting the smoothness in games when the keystone is enabled.

*Latency will hardly be noticeable with keystone function enabled, as lag time merely increase no more than 1 frame (increase 16ms at 4K@60Hz, increase 8ms at 1080@120Hz, increase 4ms at 1080p@240Hz). 

You can directly open and enjoy Netflix via the Android TV dongle (QS02). The QS02 comes pre-installed with Netflix and streaming support for 4K content, which you can also browse through and control via the Android remote or projector remote(RCI074).

The current Android TV operating system is 11.0. It's an over-the-air update when connected to the Internet once a new version is available. Please click the system notification on the home screen for OTA update and plug in the power supply during the update. 

There are tons of the latest hit streaming apps, including Netflix, Disney+, Prime Video, Apple TV, HBO Max, YouTube, YouTube Music, Spotify, etc. You can download them from the Google Play Store.

The Android dongle (QS02) supports the FAT32 and NTFS USB drive formats.

The Android dongle (QS02) supports the FAT32 and NTFS USB drive formats.

Yes. Once your iOS / Android device is connected to the same Wi-Fi as X500i you can enable AirPlay / Google Cast.

Yes, you can cast & mirror your device to BenQ gaming projector, please follow the instructions below.

For iOS/macOS  devices:

1. Select the "Apps" category

2. Find and select "Wireless Projection"

3. Follow the on-screen instructions

4. Connect to the same Wi-Fi network

5. Cast/mirror your iOS device via AirPlay

For Android devices:

1. Stay on the ATV Home Screen

2. Select “Settings”

3. Connect to the same Wi-Fi network

4. Download the Google Home app from the Google Play Store

5. Cast/mirror your Android device by selecting "Settings/Connected Devices/Connection Preferences/Cast/

Select your Device"

6. Complete casting

For more details, please refer to the link: https://www.benq.com/en-us/knowledge-center/knowledge/how-to-start-benq-smart-home-projector.html

Yes. Google Assistant can be used to access apps in areas where they're available. X500i comes with a Bluetooth remote control. Make sure the remote control is connected to X500i via Bluetooth, and then hold the mic button on the remote control to start a voice search.

Yes, you can use AirPods with the Android TV dongle. Please click and follow the instructions below.

1. Put both AirPods in the charging case and make sure that both AirPods are charging.

2. Open the lid of the AirPods case, press and hold the setup button on the case for up to 10 seconds. The status light should flash white, which means that your AirPods are ready to connect.

3. Click "Setting" on your projector and make sure that Bluetooth is enabled, then click " Remotes & Accessories" to add accessories to connect the AirPods. 

NOTE: 

• There might be latency with Bluetooth that causes some audio lag when watching movies. 

• You can only connect ONE Bluetooth device at a time. If you are using different Bluetooth devices, please pair again. 

Yes. The input lag of X500i is as low as 4.2ms@240Hz per frame, making it suitable for a variety of games. For PVP (player versus player) games or rhythm games, enjoy the best gaming experience in 4K resolution and 100"+ big screen.

The X500i console gaming projector supports ARC and eARC in HDMI-2 port. Please follow the instructions below to enable the ARC/eARC function on the projector from the OSD menu.

1. Please first manually turn on ARC: SYSTEM SETUP: Projector Menu → Audio → Audio Output → switch to Audio Return+

2. Next, change output format to your preferred format: SYSTEM SETUP: Projector Menu → Audio → Audio Output Format → switch to RAW+/LPCM

*To learn more about how ARC/eARC works, please refer to:

https://www.benq.com/en-us/knowledge-center/knowledge/

True 4K UHD must deliver 8.3 million pixels on the screen. Please read on to learn more about this topic.

According to criteria set by the CTA (Consumers Technology Association), 4K UHD must deliver 8.3 million pixels on the screen in order to be considered True 4K resolution. By harnessing the most advanced DLP 0.47” DMD (Digital Micromirror Device), our projectors utilize millions of micromirrors with quick adjustment speeds, as well as the advanced image processing capabilities of the DLP 4K UHD chipset to achieve CTA’s 4K UHD specifications (8.3 million distinct pixels for each frame), resulting in four times the resolution of Full HD 1080p.

DLP 4K UHD Technology is Texas Instruments’ pixel-shifting technology. Please read on to learn more about this topic.

DLP 4K UHD Technology is used by projectors to achieve True 4K's 8.3 million pixels regardless of the number of native pixels their DMD chip has. It not only can help double the 2716 x 1528 pixels of a 0.66” DMD, but can also quadruple the 1920 x 1080 pixels of a 0.47” DMD to create the 8.3 million pixels of True 4K at a lightning fast pixel-shifting speed.

The compatible resolutions is 3840 x 2016 in pixels at 24/25/30/50/60 (Hz). Please read on to learn more about this topic.

To automatically detect HDR content, please make sure your 4K player is sending a compatible 4K HDR signal to the projector.

1. Compatible resolutions: 4K x 2K (3840 x 2016 in pixels) at 24/25/30/50/60 (Hz).

2. Compatible HDR signals: 

• 4K/60p (60 Hz) 4:4:4 supports up to 8bits

• 4K/60p (60 Hz) 4:2:2 supports up to 12bits

• 4K/60p (60 Hz) 4:2:0 supports up to 12bits

• 4K/24p (24 Hz) 4:4:4 supports up to 12bits

• 4K/24p (24 Hz) 4:2:2 supports up to 12bits

• 4K/24p (24 Hz) 4:2:0 supports up to 12bits

In order to create smooth 4K resolution images, True 4K DLP Technology utilizes high speed pixel displacement and the superimposition of pixels to produce the 8.3 million pixels seen by the viewer. An end result of this process is a degree of vibration that may results in a slight or unnoticeable high-frequency noise.

To learn more about 4K DLP Technology, please refer to the link: https://www.benq.com/en-us/knowledge-center/knowledge/true-4k-uhd-home-projector.html

There is no need to replace it during the normal usage lifetime of the projector. Because the projector uses an LED light source instead of a lamp, it can last for about 20,000~30,000 hours so there is no need to change it during the normal usage lifetime of the projector. If you want to change the lamp, please notice that LED replacement is not user-serviceable, please contact the service center to replace it.