DMS is disabled by default. To allow the device to be managed by DMS Cloud, please follow these steps:
1. Enable DMS: In Web Management, go to Advanced Settings > DMS and set it to Enable.
2. Bind the device: Log in to DMS Cloud, then bind the device using its serial number (S/N).
You can check the serial number in two ways:
- On the label on the Receiver.
- On the Receiver's Web Management > Information page.
* Supported models: InstaShow VS25, WDC25
* Coming Soon – Q4 2026 (Firmware Version: 1.50.00)