Price Qty

The projection is out of position or not displayed in full, what can I do?

03-06-2017
Following options may improve the image performance.
1. Set your projector to the native resolution.
2. Set the optimum refresh rate and resolution. 60Hz is the most suggested optimum refresh rate.
3. Adjust keystone.
4. Perform an auto adjustment by pushing the Auto Adjust button on your projector or remote controller might help to solve this problem.

Applicable Models

DX819ST, GP10, GP20, JOYBEE GP2, LW61ST, LX60ST, MS504, MS521, MS616ST, MW767, MW820ST, MW821ST, MW851UST, MW870UST, MX805ST, MX819ST, MX822ST, MX850UST, SH940, SH960, SX914, W1500, W7000+, MW523, MW663, MW721, MW817ST, MX600, MX522, MX661, MX618ST, MX720, MX703, MX766, MX722, MX816ST, MX815ST, S30, SH910, SP840, SP920P, W1070, W1080ST, 3D GLASSES - DP2, 3D GLASSES - DC4, 3D GLASSES, 3D GLASSES - DP3, MS502, MH680, MW519, MX503, MX505, MX518, MX520, MX522P, MX620ST, MX662, PW01, W750, W770ST, W1300, W1400, WDRT8192, MS517, MS521P, MS619ST, 0.3 WALL MOUNT-WM03G2, 0.3 WALL MOUNT-WM03G3, 0.4 WALL MOUNT-WM04G2, 0.4 WALL MOUNT-WM04G3, 0.6 WALL MOUNT-WM06G2, 0.6 WALL MOUNT-WM06G3, GP3, MW621ST, W7500, SX912, SP870, CEILING MOUNT-CM00G1, EP5920, MP525P, MP575, MP615P, MP776, MP780ST+, MS510, MS513, MS612ST, MS614, MW516, MW712, MW811ST, MW814ST, MW860USTI, MX501, MX511, MX514, MX613ST, MX615, MX660, MX660P, MX701, MX710, MX711, MX717, MX763, MX764, MX810ST, MX812ST, MX813ST, WIRELESS DONGLE, SP870, SP890, SP891, W1060, W1100, W1200, W6000, W7000, W710ST, MX716

Show less arrow-up

Was this information helpful?

TOP